Key takeaways
- Small bathroom refresh: about $3,500 to $12,500 when the layout stays the same.
- Mid-range full remodel: the Portland-Vancouver metro average is about $15,000, and a full midrange remodel in the Pacific region averages about $27,700.
- High-end primary bath: about $87,000 on average in the Pacific region, and more with layout changes.
- Biggest cost drivers: labor (40%–65% of the budget), moving plumbing, tile, and any hidden water damage.
- Best-value upgrades: tub-to-shower conversions (about $3,000 on average) and midrange remodels, which recoup about 91% of their cost at resale in the Pacific region.
- Permits: installing new plumbing fixtures needs a plumbing permit in Clark County, and electrical permits come from L&I.
A bathroom remodel in Clark County, WA typically costs anywhere from about $3,500 for a small refresh to $28,000 or more for a full midrange remodel, and $80,000-plus for a high-end primary bathroom. The final number depends mostly on size, whether you move plumbing, the tile and fixtures you choose, and what turns up behind the walls.
A bathroom remodel is one of the most common projects homeowners take on, and one of the hardest to budget. Online prices range from a few thousand dollars to six figures, and most are national averages that don’t reflect labor costs in Southwest Washington.
This guide breaks down bathroom remodel costs by project size, explains what pushes the price up, and covers permits and timelines for homes in Vancouver, La Center, and the rest of Clark County.
People also read:
5 Budget-Friendly Remodeling Ideas for Your Bathroom
5 Comprehensive How-to-do Ideas for Common House Repair Services
Average Bathroom Remodel Cost by Project Size
| Project | What it usually includes | Typical cost |
| Small bathroom refresh | New vanity, toilet, fixtures, lighting, paint, maybe flooring. Layout stays the same. | About 3,500–12,500 |
| Mid-range full remodel | Gut to the studs, new tub or shower, tile, vanity and fixtures | About 15,000–28,000 |
| High-end primary bathroom | Larger room, custom tile shower, freestanding tub, double vanity, layout changes | About $80,000+ |
Sources: Angi bathroom cost data (national and Portland metro, 2026) and the Cost vs. Value Report 2025, Pacific region.
Small bathroom refresh
A refresh keeps everything where it is and replaces what you see: the vanity, toilet, faucets, mirror, lighting, and paint, sometimes with new flooring. According to Angi’s bathroom remodel cost data, a 50-square-foot bathroom typically runs about $3,500 to $12,500. Half baths and powder rooms can come in lower.
This is the range for a small bathroom remodel in most hall baths and guest baths. If your list is mostly small fixes like recaulking, a new fan, or a loose towel bar, handyman services may cover it without a full remodel.
Mid-range full remodel
A mid-range remodel takes the room down to the studs and replaces everything: tub or shower, tile, vanity, toilet, lighting, and fan. In the Portland-Vancouver area, Angi puts the average bathroom remodel at about $15,105, with most homeowners spending $7,699 to $22,695.
For a complete midrange bathroom renovation, the Cost vs. Value Report 2025 puts the Pacific-region average at $27,710. That project assumes a 5-by-7-foot bathroom with a new tub, tile surround, toilet, vanity, lighting, and ceramic tile floor.
High-end primary bathroom remodel
A primary bathroom remodel usually means a bigger room and bigger choices: a custom tiled walk-in shower, a freestanding tub, a double vanity, heated floors, and often a new layout. The Cost vs. Value Report puts an upscale bath remodel in the Pacific region at $86,863. Angi notes that luxury remodels can exceed $80,000.
What Drives Bathroom Remodeling Costs

Two bathrooms the same size can land $20,000 apart. These are the factors that make the difference.
Layout changes and plumbing relocation
Keeping the toilet, sink, and shower where they are is the single biggest way to control cost. Moving a drain means opening the floor, rerouting pipe, and often reworking the framing underneath. Angi estimates that changing plumbing and electrical locations adds about $5,000 to a project. Moving a toilet is usually the most expensive move because of the size of the drain line.
Tile, fixtures and vanities
Finishes are where budgets drift. Angi puts midrange tile at about $10 to $50 per square foot installed, and a fully tiled shower adds up fast. Stock vanities with a premade top run about $100 to $2,600, while a custom vanity can add up to $10,000. Fixtures follow the same pattern: the same faucet layout can cost $150 or $1,500.
For floors, waterproof luxury vinyl plank is a popular budget choice in bathrooms. Our guide to LVP vs. laminate vs. hardwood explains why laminate and solid hardwood don’t belong in a full bath.
Hidden water damage and subfloor repairs
Bathrooms hide problems. A slow leak at the toilet flange or behind a tub surround can rot the subfloor and framing for years before it shows. In older homes around La Center, Ridgefield, and Woodland, many of them were built over damp crawl spaces; it’s one of the most common surprises once demolition starts.
Build a contingency of 10% to 20% into your budget for this. If the damage is extensive, it may need water damage repair before the remodel can continue. A good contractor will stop, show you the problem, and give you a written price before going further.
Permits and labor
Labor is typically 40% to 65% of a bathroom remodel budget, according to Angi, because the work involves several trades in a small space: demolition, plumbing, electrical, drywall, tile, and finish carpentry. Permit fees are a smaller line, usually a few hundred dollars to about $1,000, but skipping them can cost far more at resale or inspection time.
Bathroom Upgrades Worth the Investment

Not every upgrade pays you back, but these four tend to add the most for everyday use and for resale.
Tub-to-shower conversion
A tub-to-shower conversion replaces a rarely used tub with a walk-in shower. Angi puts the average at about $3,000, with most projects between $1,500 and $15,000. A prefab shower kit sits at the low end. A custom tiled shower with glass doors and new plumbing sits at the high end.
One caution: if it’s the only tub in the house, keep in mind that families with young children often want one, which can matter at resale.
Walk-in and curbless showers
A walk-in shower remodel averages about $9,000, with most between $6,000 and $12,000, per Angi. A curbless shower takes it a step further, with no step at all. It needs a custom-sloped floor and careful waterproofing, so it costs more, but it’s easier to clean and works for every age and ability.
Grab bars and accessibility upgrades
Grab bars, a handheld shower, a bench, and a comfort-height toilet are some of the lowest-cost, highest-value changes you can make. The key is installing grab bars into blocking or studs, not just drywall anchors. Planning them during a remodel is far easier than adding them later.
Vanity and storage upgrades
A new vanity changes the look of a bathroom more than almost anything else for the money. Adding drawers, a medicine cabinet, or a recessed niche in the shower solves the storage problem most older bathrooms have. Lake’s also handles cabinet installation for custom vanities and linen storage.
How to Save Money on Your Bathroom Remodel
• Keep the layout. Leaving plumbing where it is saves thousands.
• Use tile strategically. Put the statement tile on one shower wall or the floor, and use simpler tile elsewhere.
• Choose a stock vanity and upgrade the countertop or hardware instead.
• Refinish instead of replace where it makes sense, such as a cast-iron tub in good shape.
• Make decisions before demolition starts. Changes mid-project cost the most.
• Bundle related work. If flooring or drywall elsewhere needs attention, doing it with the same crew saves a separate setup.
How Long Does a Bathroom Remodel Take?
According to Angi, a small bathroom remodel usually takes three to four weeks, or closer to two weeks if no plumbing or wiring changes. A full remodel takes two to three months from planning to final walkthrough.
Permits typically add one to two weeks before work starts, and inspections happen at rough-in and at the end. Custom vanities, special-order tile, and glass shower doors can also add lead time, so order them early.
How to Choose a Bathroom Remodeling Company
A bathroom touches more trades than almost any other room, so the company you hire matters as much as the materials. Look for a bathroom remodeling company that is registered with Washington L&I, carries liability insurance, handles permits, and uses licensed plumbers and electricians for that work.
Questions to ask before signing a contract
• What is your L&I registration number?
• Who pulls the permits, and who does the plumbing and electrical work?
• Is the quote itemized for demolition, materials, labor, and fixtures?
• How do you handle hidden damage once the walls or floor are open?
• What is the timeline, and what could delay it?
• Who is my main contact during the job?
• What warranty do you offer on your labor?
Frequently Asked Questions
What is the most expensive part of a bathroom remodel?
Labor is usually the largest share, at 40% to 65% of the budget. Among materials, a custom tiled shower and moving plumbing are the highest single costs.
Does a bathroom remodel increase home value?
Yes, especially a midrange one. In the Cost vs. Value Report 2025, a midrange bath remodel in the Pacific region recouped about 91% of its cost at resale. An upscale remodel recouped about 45%, so high-end finishes are more for your own enjoyment than for resale.
Do I need a permit to remodel a bathroom in Washington?
Usually, yes. In unincorporated Clark County, installing plumbing fixtures such as toilets, sinks, tubs, and showers needs a plumbing permit, and moving or removing walls needs a building permit. Electrical permits come from L&I. Cosmetic work like painting, cabinets, and countertops doesn’t need one. Inside city limits, including Vancouver and La Center, check with your city’s building department.
Can I use my home while the bathroom is being remodeled?
Yes, if you have another bathroom. Expect some dust, noise, and short water shutoffs during plumbing work. If it’s your only bathroom, ask your contractor about scheduling to keep the toilet working as long as possible, or plan a short stay elsewhere during the busiest phase.
How much does a tub-to-shower conversion cost?
About $3,000 on average, according to Angi, with most projects between $1,500 and $15,000. Prefab shower kits cost less; custom tile, glass doors, and plumbing changes cost more.
Plan Your Bathroom Remodel With a Local Team
Lake’s General Contracting is a licensed, bonded, and insured general contractor based in La Center, Washington, serving homeowners in Vancouver, La Center, Ridgefield, Woodland and across Clark County since 2018. We handle the whole project, from small refreshes to full remodels, including the plumbing, permits, and any surprises behind the walls.
Ready to see what your bathroom will cost? Book a free bathroom remodel consultation or call us at 360-901-0292.